 SPECIFICATIONS:
Size: 20 ¾" (52.7cm) deep X 18 ¾" (47.6cm) tall X 14 ½" (36.83cm) wide.
Weight: 24.3 lbs (11 kg).
Scan Speed: With a powerful computer and an HDR setting of three, 40 seconds @ medium resolution (6mp mode), and 65 second @ high-resolution (10mp mode). Add 10 seconds per pass in HDR 5 + 10-15 seconds for processing each additional pass.
HDR Modes: "High Dynamic Range" mode is where the scanner takes several scans of the image at different exposure/brightness levels and then averages all of the passes together to further enhance the image's dynamic range (latitude) beyond the range of the scanning camera alone. Software currently allows HDR modes of 2 thru 5 - meaning the system will take 2 to 5 passes and then averages those together into a single image with wider dynamic range of the grayscale. These extra passes, as well as the time to process and average the passes adds additional processing time to the scan.
Resolution & Grayscale Depth: Medium mode is a 6 mega pixel (mp) producing an image which is 2112 x 2816 (150dpi) from a full 14"x17" film. High mode is 10mp and produces an image which is 2736 x 3648 (195dpi) from a full 14"x17" film. Higher resolutions can be obtained by zooming into a smaller area of a film. Grayscale depth in standard mode is 8bit (256 levels of gray). In HDR mode this jumps up to 12Bit (4096 levels of gray).
File Sizes (typical): Medium produces a jpg which is approx 1.5mb in size. High produces a jpg which is approx. 4.0megs in size.
RDC 7.1 Software Requirements
- Windows XP Professional (Hardware is not supported on Windows Vista at this time)
- 60 GB Hard Drive minimum
- 1GB RAM minimum
- 2.4 GHz Pentium processor or higher
- 17” Flat panel LCD monitor recommended
Power Requirements: 12 VDC 10 watts
Warranty/Support: Unit comes with a 1 year warranty on all hardware which covers defects in materials and workmanship. Also included are 30 days of telephone technical support. After you receive your new RDC unit, a LogicRad technical representative will call to go over the installation and setup of the unit. They will walk you through all the features this software has, and with proper network connection to the internet they can even perform some of the installation for you remotely. There is an optional 3-year extended hardware and phone support available. Your unit will ship with paperwork that allows you to sign up for this extended warranty and make payment directly to LogicRad. As of July 2008 the current price on this option is $375.00 - but is subject to change.
PLEASE NOTE: This unit is intended for the veterinary market. As such it is NOT FDA 910(k) approved for use in human radiography where the images will be used for diagnostic purposes.
Learn more about RDC Software |
